Canister Purge Solenoid: Service and Repair

Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure

1. Turn the ignition OFF.




2. Disconnect the purge line from the purge valve solenoid.




3. Disconnect the purge valve solenoid electrical connector.




4. Disconnect the purge line from the manifold side of the purge valve solenoid.




5. Remove the purge valve solenoid and bolt from the intake manifold.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the purge valve solenoid to the intake manifold.

Tighten the purge solenoid bolt to 10 N.m (89 lb in).





2. Connect the purge line to the manifold side of the purge valve solenoid.




3. Disconnect the purge valve solenoid electrical connector.




4. Connect the purge line to the purge valve solenoid.