Closeout/Insulator Panel Replacement - Right

Closeout/Insulator Panel Replacement - Right

Removal Procedure

Caution: Refer toSIR Caution in Cautions and Notices.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 5 in SIR.




2. Remove the right sound insulator fasteners (2) from the I/P.
3. Disconnect the following components:

* The courtesy lamp
* The PSIR connector
* The heater temperature sensor connector

4. Remove the right sound insulator (1).



Installation Procedure





1. Connect the following components to the insulator:

* The courtesy lamp
* The PSIR connector
* The heater temperature sensor connector

2. Position the right sound insulator (1) to the I/P.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the fasteners (2) to the I/P.

Tighten the fasteners to 1.9 N.m (17 lb in).

4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 5 in SIR.