Fascia Replacement - Front Bumper
Fascia Replacement - Front Bumper
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the grille. Refer to Fascia Grille Replacement (Regal) (Fascia Grille Replacement (Regal))Fascia Grille Replacement (Century) (Fascia Grille Replacement (Century)) .
2. Remove the front fender liners. Refer to Front Fender Liner Replacement (Service and Repair) in Body Front End.
3. Remove the air deflectors from the front bumper fascia. Refer to Radiator Air Baffle and Deflector Replacement - Lower in Engine Cooling.
4. Remove the bolts from the fascia at the fender.
5. Remove the bolts from the upper fascia support. Refer to Fascia Support Replacement - Front Bumper Upper (Fascia Support Replacement - Front Bumper Upper) .
6. Use J 38778 in order to remove the push-in retainers from the following components:
* The upper fascia support
* The lower fascia
* The lower bumper impact bar
7. Remove the front bumper fascia.
Installation Procedure
1. Install the front bumper fascia.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts to the fascia at the fender.
Tighten the bolts to 10 N.m (88 lb in).
3. Install the push-in retainers to the upper fascia support.
4. Install the bolts to the upper fascia support. Refer to Fascia Support Replacement - Front Bumper Upper (Fascia Support Replacement - Front Bumper Upper) .
Tighten the bolts to 2 N.m (18 lb in).
5. Install the fascia air deflectors. Refer to Radiator Air Baffle and Deflector Replacement - Lower in Engine Cooling.
6. Install the push-in retainers to the lower bumper impact bar.
7. Install the push-in retainers to the lower fascia support at the front bumper fascia.
8. Install the front fender liners. Refer to Front Fender Liner Replacement (Service and Repair) in Body Front End.
9. Install the grille. Refer to Fascia Grille Replacement (Regal) (Fascia Grille Replacement (Regal))Fascia Grille Replacement (Century) (Fascia Grille Replacement (Century)) .