Assist Handle and Rear Coat Hook Replacement

Assist Handle and Rear Coat Hook Replacement

Removal Procedure





1. Rotate the assist handle (5) downward.
2. Remove the 2 fasteners (3) from the handle assembly.
3. Remove the bulb socket assembly from the lamp assembly.
4. Disconnect the electrical connectors.
5. Remove the assist handle assembly.



Installation Procedure





1. Connect the electrical connectors.
2. Install the bulb socket in the lamp assembly.
3. Position the pull handle.
4. Install the 2 fasteners (3).
5. Tighten the fasteners to secure the assembly to the roof.