Removing and Installing/Replacing Panel for Roof Pillar at Front (A-Pillar), Left or Right

51 43 201 - Removing and installing/replacing panel for roof pillar at front (A-pillar), left or right





Special tools required:
- 00 9 317





Warning!
Follow 51 00 ... Safety Instructions For Working on Cars With Airbag Systems safety instructions for working on vehicles with airbag systems.

Important!
Do not use any sharp-edged tools to remove trim (risk of damage to head airbag).





Lever out clip (1) with special tool 00 9 317 .

If necessary, detach mucket in area of A-pillar panel.





Release screw (1).

Installation Note:
Tightening torque 51 43 2AZ [1][2]Specifications.

Make sure clip (2) is correctly seated.





Pull out trim for front roof pillar towards inside/top.





Installation Note:
Clips (1 and 2) on instrument panel (3) must not be damaged.





Installation Note:
If necessary, replace faulty clips (1) of panel (2).





Installation Note:
If necessary, replace defective grommets (1).

Do not damage head airbag (2) during installation.