Defect Code 60, 61

Defect Codes 60, 61:

*D* Defect code memory: 60, 61 Valve coil fault:

Note: The EDC control unit can only register faults in the electrical/electronic

Determine damper valve in question by reading out the measured values (status monitoring or during troubleshooting) and by alternately detaching the
connections at the damper (connector at front right/left and rear right/ left on damper).

If the cause of the defect is not found with the aid of the following troubleshooting procedure, there could be mechanical damage to the damper system (e.g.
solenoid valves). See: Repair Instructions EDC Ill.

Troubleshooting: Check valve control wires and repair if necessary:

- Comfort front: From connector X 263 Pin 1 to corresponding left/right dam per valve
- Comfort rear: From connector X 263 pin 3 to corresponding left/right dam per valve
- Normal front: From connector X 263 Pin 2 to corresponding left/right damper valve
- Normal rear: From connector X 263 Pin 5 to corresponding left/right damper valve