Selector Mechanism Function Unit Overview

Selector Mechanism Function Unit Overview

• Coat the bearings and the sliding surfaces with polycarbamide grease (G 052 142 A2).






1 Function Unit Housing

2 Selector Lever Position Locking Lever "P"

• Removing and installing, refer to => [ Selector Lever Position P Locking Lever ] Selector Lever Position P Locking Lever

3 Bushings

4 Axial Bearing

• For shift gate

5 Bearing

• Shift gate

• Into function unit housing

6 Locking Plate

• For axial bearing

• Replace

7 Shift Bearing

• For shift gate

8 Bearings

• For shift bearing

9 Shift gate

• Removing and installing, refer to => [ Shift Gate ] Shift Gate

10 Shift Lock Solenoid (N110)

• Removing and installing, refer to => [ Shift Lock Solenoid (N110) ] Service and Repair

11 Transmission Park Selector Switch (F305)

• Removing and installing, refer to => [ Transmission Park Selector Switch (F305) ] Service and Repair

12 Guide

• For the emergency release lever

• Is clipped inside the function unit housing

13 Rubber Stop