Upper Cable

Upper Cable

• Removal and installation are same for right and left.

Special tools, testers and auxiliary items required

• Pry Lever (80 - 200)

Removing






- Remove the rear seat. Refer to => [ Seat Frame ] Seat Frame.

- Remove the backrest release actuator. Refer to => [ Backrest Release Actuator ] Backrest Release Actuator.

- Remove the luggage compartment side trim. Refer to => [ Luggage Compartment Side Trim ] Luggage Compartment Side Trim.

- Remove the rear sill trim. Refer to => [ Rear Sill Panel Trim ] Rear Sill Panel Trim.

- Unclip the cable retainers - 2 and 3 - - 1 - using the (80 - 200) and remove the cable.

Installation

Installation is reverse of removal, but note the following:

- Make sure the cable is fully attached.