Power Take-Off Drive Chain

Power Take-Off Drive Chain

Special tools, testers and auxiliary items required

• Locking Pin (T40071)

Removing

• The transmission is removed.

- Remove timing chain lower cover. Refer to => [ Lower Timing Chain Cover ] Lower Timing Chain Cover.

Risk of destroying due to reversed running direction on a used drive chain.

• Paint arrows to mark the power take-off drive chain running direction so it can be installed again.

- Press the tensioning rail in the direction of the - arrow - and secure it with a (T40071).






- Remove the bolt - 1 - and remove the idler sprocket.

- Remove the bolts - 2, 3 and 4 - and the chain tensioner.

- Remove the power take-off drive chain.

Installing

• Tightening specifications, refer to => [ Power Take-Off Drive Chain Overview ] Power Take-Off Drive Chain Overview.

Install in reverse order of removal. Note the following:

• Replace the gasket.

• Replace bolts which have been tightened to an additional torque.

- Install timing chain lower cover. Refer to => [ Lower Timing Chain Cover ] Lower Timing Chain Cover.