Manually Adjustable Headrests

Manually Adjustable Headrests

• The headrests can be removed with the front seats installed.

• The release button for the headrests is located on the left side of each headrest guide.

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Move the front seat forward into the lowest position and tilt backrests approximately 45°.

- Pull the headrest all the way up.

- Use the trim removal wedge (3409) to unclip the left headrest guide cover - 1 -.

- Use a small screwdriver to carefully actuate the release button on the headrest support - arrow - while pulling the headrests out at the same time.






Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ Manually Adjustable Headrests Assembly Overview ] Manually Adjustable Headrests Assembly Overview.