Backrest Cover

Backrest Cover

• Removal and installation can be done with front seat installed.

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)

Removing






• The retaining clips - 1, 2 - together with hooks on the backrest frame can only be detached up to the first catch.

- Release retaining clips - 1, 2 - using the pry lever - RMV outside mirror (80 - 200) up to the first catch - arrows A -.

- To detach the retaining clips - 1 - together with hooks, move the backrest cover - 3 - in - arrow direction C -.

- To secure the retaining clips - 2 - together with the hooks, move the backrest cover in - arrow direction B -.

- Detach left and right rubber strap - 1 - at the bottom of the seat pan.






- Pull off backrest cover in upward direction.

Installing

Install in reverse order of removal. Note the following:

- Install backrest cover with catches at the bottom of the backrest frame.

- Insert retaining clips together with hooks into the guides on the backrest cover.

- Forcefully press backrest cover in the direction of the backrest until the retaining clips engage audibly.

- Check if the backrest cover is correctly latched.

Installation note: For example tightening specifications, replace components => [ Backrest Assembly Overview ] Backrest Assembly Overview.