Lumbar Support

Lumbar Support

Removing






- Remove backrest cover together with backrest cushion. Refer to => [ Backrest Cover and Backrest Cushion, Reclining Seat ] Backrest Cover and Backrest Cushion, Reclining Seat.

- Remove the pressure distribution plate. Refer to => [ Pressure Distribution Plate ] Pressure Distribution Plate.

- Separate the cable ties and free up the wires for the lumbar support.

- Remove the screw - 3 -.

- Swivel the lumbar support - 2 - toward the front, disengage it at the backrest frame - 1 - - Arrows - and remove.

Installing

- Attach lumbar support - 2 - to the backrest frame - 1 - - Arrows -.

- Firmly bolt lumbar support to the backrest frame.

Installation is performed in reverse order of removal, noting the following:

Installation note: For example tightening specifications, replace components. Refer to => [ Lumbar Support Assembly Overview ] Lumbar Support Assembly Overview.