Backrest Cover

Backrest Cover

• Removal and installation can be done with comfort reclining seat installed.

Removing






- Footrest Removing, refer to => [ Foot Rest ] Foot Rest.

- Remove rear seat entertainment mount Refer to => [ Rear Seat Entertainment Mount ] Rear Seat Entertainment Mount.

- Detach left and right rubber strap - 1 - at the bottom of the seat pan.

- Remove the bolts - 2 -.

- Lift the pivoting arm - 2 - for the foot rest until it is just before the stop, as illustrated.






- Swivel backrest cover - 3 - upward and toward the rear - Arrow A - and underneath, disengage the clips - 1 - that are on the backrest frame - Arrow B -.

- Raise lever arm - 1 - for the foot rest until it is positioned just before the stop, as shown in the figure.






- Carefully disengage the backrest cover from the foot rest lever arms - Arrows - and remove.

Installing

Install in reverse order of removal. Note the following:

- Check if the backrest cover is correctly latched.

Installation note: For example tightening specifications, replace components.Refer to => [ Backrest Assembly Overview ] Backrest Assembly Overview.