Roof Grab Handle

Roof Grab Handle

Special tools, testers and auxiliary items required

• Long reach special wrench for slotted bolts (VAS 6416)

Removing






- Remove the caps - 1 and 3 - with angled screwdriver (VAS 6416) - 2 - and then remove the screws for the roof grab handle.

- Remove the roof grab handle - 4 - from the body opening.

Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ A-Pillar Upper Trim Assembly Overview ] A-Pillar Upper Trim Assembly Overview.