Headrest Frame

Headrest Frame

Removing






- Remove upper backrest pressure distribution plate. Refer to => [ Upper Backrest Adjustment Pressure Distribution Plate ] Upper Backrest Adjustment Pressure Distribution Plate.

- Remove the bolts - 2 -.

• Ignore - 1 and 3 -.

- Cut cable ties and disconnect the electrical connector for headrest adjustment motor.

- Remove the nuts - 1, 5 - and bolts - 2, 4 -.






- Detach headrest from - 3 - at the lumbar support module carrier - arrows - and remove it.

Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components. Refer to => [ Headrest and Backrest Adjustment Assembly Overview ] Headrest and Backrest Adjustment Assembly Overview.