Diagram 48/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Level control system control module, All wheel drive control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J197 - Level control system control module Locations Locations

J492 - All wheel drive control module Locations All-Wheel Drive System

J533 - Data bus on board diagnostic interface Locations

J849 - Sensor electronics control module Locations Locations

ST4 - Fuse panel 4

SF5 - Fuse 5 (on fuse panel F) Overview Of Fuses

ST5 - Fuse panel 5

SF10 - Fuse 10 (on fuse panel F) Overview Of Fuses

T6w - 6-pin connector Locations

T32b - 32-pin connector Locations

T46b - 46-pin connector

T47a - 47-pin connector Locations

TV33 - Powertrain CAN bus high wire junction

TV37 - Powertrain CAN bus low wire junction

T50 - 50-pin connector Sensor Electronics Control Module -J849-

(744) - Ground connection (in spare wheel well) [1][2]Ground Locations

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Data bus wire (FlexRay bus)

*3 - Data bus wire (CAN bus)

Next Diagram 48/3 (Tracks 15-28)