Front Suspension

Upper Control Arm Bonded Rubber Bushings

Special tools, testers and auxiliary items required

• Assembly Tool (3301)

• Front and Rear Bearing Tool (3348)

• The upper control arm us removed. Refer to => [ Upper Control Arm ] Upper Control Arm.

Pulling Out Bonded Rubber Bushing





• Control arms must only be clamped in a vise with protective vise jaw lining!

- Order the special tools as illustrated.

- Turn the nut and remove the bonded rubber bushing.

Pulling In Bonded Rubber Bushing





• Do not use lubricant!

A = bearing

- Order the special tools as illustrated.

- Install the bonded rubber bushing all the way.

- Check the press-in depth for the bonded rubber bushing - 1 - inside the control arm - 2 -.






• Dimensions - a and b - must be identical.

- Adjust the bonded rubber bushing if the dimensions - a and b - are different.

- Install the upper control arm. Refer to => [ Upper Control Arm ] Upper Control Arm.