Rear Three-Point Seat Belt, Assembly Overview

Rear Three-Point Seat Belt, Assembly Overview






1 Screws

• Do not change the bolt position when removing and installing the belt guide. It is set by the manufacturer.

2 Belt guide

• Removing and Installing, refer to => [ Rear Seat Belt Guide ] Rear Seat Belt Guide

3 Nut

4 Bolt

• If it was removed because of an accident, replace the bolt

• 45 Nm

5 Automatic belt retractor

• Driver side: country-specific with left rear seat belt tensioner igniter (N196)

• Front passenger side: country-specific with a right rear seat belt tensioner igniter (N197)

• Removing and Installing, refer to => [ Rear Three-Point Seat Belt ] Rear Three-Point Seat Belt

6 Noise Insulation

• for the automatic belt retractor

7 Connector

• For countries with a left rear seat belt tensioner igniter (N196)

• For countries with a right rear seat belt tensioner igniter (N197)

8 Bolt

• If it was removed because of an accident, replace the bolt

• 45 Nm

9 Rear belt anchor

• Removing and Installing, refer to => [ Rear Belt Anchor ] Rear Belt Anchor