Charge Air Pressure Sensor and Charge Air Pressure Sensor 2

Charge Air Pressure Sensor and Charge Air Pressure Sensor 2

Removing

Cylinder Bank 2 (left)

- Free up the vacuum hose - 1 -.






- Remove the bolts - arrows - and remove the cover - 2 -.

Continued for Both Sides






- Disconnect the connector - 1 -.

- Remove the bolts - arrows - and remove the charge air pressure sensor.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Supercharger Overview ] Supercharger Overview.

• Replace the self-locking bolts and the O-ring.

• Clean the threaded holes for the charge air pressure sensor inside the supercharger housing with a thread tap before assembling.