Right Longitudinal Member Heat Shield

Right Longitudinal Member Heat Shield

Removing






- Remove the noise insulation: front, refer to => [ Front Noise Insulation ] Front Noise Insulation, rear, refer to => [ Rear Noise Insulation ] Rear Noise Insulation.

- Remove the spring clips - 4 and 5 - from the transmission side and the spring - 1 - from the engine mount side.

- Remove the air guide pipe from the air filter housing.

- Remove the lock washer - 3 -.

- Swivel the heat shield - 2 - for the front longitudinal member upward and remove it.

Installing

• For the correct tightening specifications, refer to => [ Heat Shields Assembly Overview ] Heat Shields Assembly Overview.

Installation is reverse of removal, but note the following:

- Install the air guide pipe in the air filter housing.

- Install the noise insulation: front, refer to => [ Front Noise Insulation ] Front Noise Insulation, rear, refer to => [ Rear Noise Insulation ] Rear Noise Insulation.