Plenum Chamber Bulkhead Heat Shield

Plenum Chamber Bulkhead Heat Shield

Removing






- Remove the plenum chamber bulkhead. Refer to => [ Plenum Chamber Bulkhead ] Plenum Chamber Bulkhead.

- Remove the lock washers - arrows -.

- Remove the heat shield - 1 - from the plenum chamber bulkhead.

Installing

• Tightening specifications, refer to => [ Heat Shields Assembly Overview ] Heat Shields Assembly Overview.

Installation is reverse of removal, but note the following:

- Install the plenum chamber bulkhead. Refer to => [ Plenum Chamber Bulkhead ] Plenum Chamber Bulkhead.