Left Longitudinal Member Heat Shield

Left Longitudinal Member Heat Shield

Removing






- Remove the noise insulation: front, refer to => [ Front Noise Insulation ] Front Noise Insulation, rear, refer to => [ Rear Noise Insulation ] Rear Noise Insulation.

- Remove the spring clips - 1 and 2 - from the transmission side and the spring - 5 - from the engine mount side.

- Drain the coolant.






- Open the clamp - 2 -, move it to the side and remove the coolant line.

• Ignore - 1 -.

- Open the clamp - arrow -, free up the coolant hose and remove the left coolant hose from the front coolant pipe.






- Remove the lock washer - 3 -.






- Swivel the heat shield - 4 - for the front longitudinal member upward and remove it.

Installing

• For the correct tightening specifications, refer to => [ Heat Shields Assembly Overview ] Heat Shields Assembly Overview.

Installation is reverse of removal, but note the following:

- Install the coolant hose and coolant line.

- Install the noise insulation, refer to front => [ Front Noise Insulation ] Front Noise Insulation, rear, refer to => [ Rear Noise Insulation ] Rear Noise Insulation.