License Plate Bracket

License Plate Bracket

Removing






- Remove the front bumper cover end plate. Refer to => [ Front Bumper Cover End Plate ] Front Bumper Cover End Plate.

- Remove the front parking aid sensor (if equipped).

- Release the tabs - arrow A - and remove the license plate bracket - 1 - from the radiator grille - 2 - - arrows B -.

Installing

Installation is reverse of removal, but note the following:

- Position the license plate bracket on the radiator grille and press on the clips until they audibly engage.

- Install the front parking aid sensor (if equipped).

- Install the front bumper cover end plate. Refer to => [ Front Bumper Cover End Plate ] Front Bumper Cover End Plate.