Shift Mechanism Emergency Release

Shift Mechanism Emergency Release

• The selector lever will not move out of "P" if the battery is disconnected or is discharged. The vehicle cannot be moved or towed.

• The shift lock solenoid (N110) will cancel out the lock when the emergency release is activated.

Procedure






- Remove the front ashtray insert.

- Pry off the cap in the ashtray housing with a screwdriver - arrow -.

• The shape of the cap may vary from the illustration.

- Carefully press on the shift lock solenoid through the center opening in the ashtray housing in the cylinder - arrow - with a screwdriver, and at the same time, while the locking button is pressed down, shift the selector lever out of position "P".






• This unlocks the locking lever - 1 - when the selector lever is in "P".

• If the cylinder - arrow - on the shift lock solenoid is covered by insulation or a wire, then move the insulation or the wire to the side.