Oil Pump

Oil Pump

Special tools, testers and auxiliary items required

• Assembly Tool (T10118)

• Locking Tool (T40265)

Removing

- Remove the lower oil pan. Refer to => [ Lower Oil Pan ] Lower Oil Pan.

- Remove the oil baffle - arrows -.






- Pull the chain tensioner spring with the (T10118) in the direction of the - arrow - and secure it with the (T40265).






- Remove the bolts - arrows - and the oil pump.






Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Oil Pan and Oil Pump Overview ] Oil Pan and Oil Pump Overview.

- Make sure both alignment bushings for centering the oil pump are in there.

- Install the chain sprocket for the oil pump and then install the oil pump.

Danger of causing damage to the engine.

• The following procedure must be observed otherwise the chain tensioner spring does not spring into the installed position:

- Pull the chain tensioner spring with the (T10118) in the direction of the- arrow - and remove the (T40265).






- Insert the new oil baffle and attach it.

• There are plastic ribs on the oil baffle that deform permanently when tightening. The plastic ribs ensure the oil baffle is not loosen and does not rattle. Because of this, always replace the oil baffle.

- Install lower oil pan. Refer to => [ Lower Oil Pan ] Lower Oil Pan.

- Fill the engine oil and check the level.