Needle Bearing on Crankshaft

Needle Bearing on Crankshaft

Special tools, testers and auxiliary items required

• Drift (VW 207 C) or Centering Mandrel (3176)

• Depth Gauge (VAS 6082)

• Kukko 21/1 internal puller

• Kukko 22/1 counter-support

Pulling Out

• Transmission removed.

- Remove needle bearing with Kukko 21/1 internal puller and Kukko 22/1 counter-support.





Driving In

- Install the needle bearing using a (VW 207 C) or a (3176).





• Installed position: the lettered side is legible.

• Installation depth: - a - = approximately 3 mm.