Upper Oil Pan Overview

Upper Oil Pan Overview






1 Seals

• Replace

2 Upper Oil Pan

• Removing and installing, refer to => [ Upper Oil Pan ] Upper Oil Pan

3 O-ring

• Replace

4 Seals

• Replace

5 O-ring

• Replace

6 Fitting Pin

• Quantity: 2

7 Bolt

• Replace

• Tightening specification and sequence, refer to => [ Upper Oil Pan, Tightening Specifications and Sequence ]

8 Seal

• Replace

9 Locking Bolt for the "TDC" Opening.

• 35 Nm

• Use a long hex socket wrench with a ball head for removing and tightening

Upper Oil Pan, Tightening Specifications and Sequence





• Replace bolts that are tightened to the specification.

- Tighten bolts in 3 stages as follows: