0B5A (S-Tronic) Transmission
DSG Transmission Mechatronic (J743)
Removing
• Transmission installed
There is a risk of damaging the transmission.
• Do not start the engine if there is no ATF in the transmission and the DSG transmission mechatronic is removed.
• => [ Repair Information ] Repair Information.
• => [ Clean Working Conditions ] Clean Working Conditions.
• S-Tronic Transmission 0B5 information, refer to => [ ATF Pipes ] Service and Repair.
- Move the selector lever into "P".
- Turn off the ignition and remove the key.
There is a risk of destroying the transmission control module (Mechatronic) with static discharge.
• Always "discharge" the static electricity. Do this by touching a grounded object, for example vehicle ground, the vehicle or the hoist.
• Do not touch contacts in transmission connector with hands.
- Disconnect the connector on transmission by rotating screw connections counter-clockwise - arrow -.
- Remove the ATF oil pan. Refer to => [ Automatic Transmission Fluid Oil Pan ] 0B5A (S-Tronic) Transmission.
A description for additional processes is provided in the "7 Speed S-Tronic Transmission 0B5, Servicing".
Installing
Install in reverse order of removal. Note the following:
There is a risk of destroying the transmission control module (Mechatronic) with static discharge.
• Always "discharge" the static electricity. Do this by touching a grounded object, for example, vehicle ground, the vehicle or the hoist.
• Do not touch the contacts in transmission connector with hands.
- Make sure the connector is correctly connected to the Mechatronic.
- Complete the steps required after connecting the battery.
- Install the ATF suction filter.
- Install the ATF pan. Refer to => [ Automatic Transmission Fluid Oil Pan ] 0B5A (S-Tronic) Transmission.
- Fill with ATF. Refer to => [ ATF, Checking Level and Correcting ] ATF, Checking Level and Correcting.
• After replacing the DSG Transmission Mechatronic (J743) , the corresponding "Guided Functions" must be performed with the vehicle diagnostic tester => [ Transmission Guided Functions ] 0B5A (S-Tronic) Transmission.