High Beam Bulb, Through MY 09

High Beam Bulb, Through MY 09

• Adjust the headlamps after performing any work that could have affected their adjustment => [ Headlamps, Adjusting ] Headlamps, Adjusting.

Removing






- Turn housing cover - 1 - counterclockwise - arrow - and remove from headlamp housing.

- Remove bulb - 2 - from spring clips.






- Disconnect electrical harness connector - 1 - at bulb.

Installing

Install in reverse order of removal, observing the following:

- Insert bulb in housing, taking care not to touch glass bulb with bare hands.

- Press bulb in housing over spring clamp resistance.

- Close housing cover by turning clockwise.