Backrest Cover with Backrest Cushion for Multi-contour Seat

Backrest Cover with Backrest Cushion for Multi-contour Seat

Removing






- Remove the rear seat backrest. Refer to => [ Rear Seat Backrest ] Rear Seat Backrest.

- Remove headrest guides. Refer to => [ Headrest Guide ] Headrest Guide.

- Remove rear side airbag from the bottom of the pocket sewn into the backrest cover. Refer to => [ Rear Side Airbag with Igniter N201/N202 - Rear Seat Backrest ] Rear Side Airbag with Igniter N201/N202 - Rear Seat Backrest.

- Versions with heated seats: Free up the seat heating electrical connector.

- Detach clip - 2 - with a screwdriver on the upholstery wire - 1 - and remove.

- Detach molding - 4 - for backrest cover surrounding the backrest frame - 3 -.

- Remove backrest cover and backrest cushion - 5 - from backrest frame and support.

Installing

Install in reverse order of removal. Note the following:

- Ensure that the backrest cover is situated free of wrinkles.

Installation note: For example tightening specifications, replace components. Refer to => [ Backrest Cover and Backrest Cushion for Rear Seat Bench Assembly Overview ] Backrest Cover and Backrest Cushion for Rear Seat Bench Assembly Overview.