Retaining Bracket

Retaining Bracket

Removing






• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Before handling pyrotechnic components (for example, connecting the electrical connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

- Remove the rear seat backrest. Refer to => [ Rear Seat Backrest ] Rear Seat Backrest or the seat frame/rear seat backrest => [ Lower Seat Frame/Rear Seat Backrest ] Lower Seat Frame/Rear Seat Backrest.

- Remove the rear shelf. Refer to => [ Rear Shelf ] Rear Shelf.

- Remove the nuts - 2 and 3 - and bracket - 1 -.

Installing

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Before handling pyrotechnic components (for example, connecting the electrical connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

• Observe all measures when installing the backrest. Refer to => [ Rear Seat Backrest ] Rear Seat Backrest.

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components. Refer to => [ Rear Seat Backrest Assembly Overview ] Rear Seat Backrest Assembly Overview.