Rear Center Armrest Cover

Rear Center Armrest Cover

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Use the trim removal wedge (3409) to secure the gap cover - 1 - to the cover - arrows - and let it hang downward.

- Pull up to unclip cover - 1 - from the top of the center armrest using the trim removal wedge (3409) - arrows -.






- Swing the cover upward, secure to locking tab - 2 - and remove.

Installing

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ Rear Center Armrest - Vehicle with Long Wheel Base ] Rear Center Armrest - Vehicle with Long Wheel Base.