Input Shaft, Servicing with 6 Lining Discs

Input Shaft, Servicing with 6 Lining Discs


• Servicing with the incorrect number of lining discs leads to input shaft damage after bringing vehicle into operation again.

• In this case, the software in the transmission control module (J217) does not match the number of lining discs.

There are two types of transmissions:

1. Transmission with 7 lining discs serviced

This transmission installed in vehicles with the following engines:






• Refer to => [ Input Shaft with 7 Lining Discs Overview ] Input Shaft with 7 Lining Discs Overview

• Refer to => [ Input Shaft with 7 Lining Discs ] Input Shaft with 7 Lining Discs

2. Transmission with 6 lining discs serviced

These transmissions are installed in vehicles with all other engines.

• Refer to => [ Input Shaft with 6 Lining Discs Overview ] Input Shaft with 6 Lining Discs Overview

• Refer to => [ Input Shaft with 6 Lining Discs ] Input Shaft with 6 Lining Discs