System, Venting or Filling

System, Venting or Filling

Special tools, testers and auxiliary items required

• Vehicle diagnosis, testing and information system (VAS 5051 A)

- Connect (VAS 5051 A) and then perform vehicle-specific entry into Guided Fault Finding and select Go To button "function/component selection". Refer to => [ VAS 5051 Connecting and Selection Functions ] Scan Tool Testing and Procedures.

Then

- "Chassis"

- "34 - Level control".

- "01 - On Board Diagnostic (OBD) capable systems"

- "J197 - Level control system control module functions".

- "J197 - System venting or filling".

• When filling the rear axle, note the following.

Filling the Rear Axle Air Spring






When charging, make sure that centering pin - arrow a - drives into bore of longitudinal member - arrow b -.