Cover with Oil Separator

Cover with Oil Separator

Removing

- Remove the left lower section of the intake manifold.





- Remove the upper coolant pipe. Refer to => [ Upper Coolant Pipe ] Upper Coolant Pipe.

- Remove bolts - arrows -.





- Remove the high pressure lines and oil separator cover - 1 -.

Installing

• Tightening specifications, refer to => [ Oil Check Valves and Oil Separator Assembly Overview ] Oil Check Valves and Oil Separator Assembly Overview.

Installation is in reverse order of removal, note the following:

• Replace the gasket.

- Install the upper coolant pipe. Refer to => [ Upper Coolant Pipe ] Upper Coolant Pipe.

- Install the left lower section of the intake manifold.