Diagram 61/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Humidity sensor, Automatic dimming interior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G355 - Humidity sensor Locations Pass Compartment A/C Components

G399 - Light recognition sensor Locations Headlamp Assistant, Humidity Sensor and Lane Assist Overview

J393 - Comfort system central control module Overview of Control Modules in Rear part of vehicle - Sedan (4-door models)

J533 - Data bus on board diagnostic interface Overview of Control Modules in Interior of Vehicle

J844 - Automatic high beam assist control module Locations Headlamp Assistant, Humidity Sensor and Lane Assist Overview

ST1 - Fuse panel 1

SC1 - Fuse 1 (on fuse panel C) Overview Of Fuses

ST2 - Fuse panel 2

SC9 - Fuse 9 (on fuse panel C) Overview Of Fuses

T8b - 8-pin connector

T8c - 8-pin connector

T17c - 17-pin connector, black Overview Of Connector Stations

T20d - 20-pin connector Locations

T32c - 32-pin connector Control Modules in Right Luggage Compartment

W1 - Front interior lamp

Y7 - Automatic dimming interior rearview mirror

(277) - Ground connection 3 (in interior wiring harness)

(639) - Ground connection on left A-pillar Overview of Ground Connections (4-door Models (Sedan))

(B528) - LIN bus connection 1 (in main wiring harness)

(B668) - CAN bus extended high connection 2 (in main wiring harness)

(B669) - CAN bus extended low connection 2 (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Only for vehicles with lane assist

*3 - Only for vehicles with a humidity sensor

*4 - From May 2009

*5 - Through April 2009

Next Diagram 61/3 (Tracks 15-28)