Front Coolant Pipe

Front Coolant Pipe

Special tools, testers and auxiliary items required

• Drip Tray for VAS 6100 (VAS 6208)

Removing






- Drain the coolant. Refer to => [ Coolant, Draining and Filling ] Service and Repair.

- Remove fan shroud. Refer to => [ Fan Shroud ] Service and Repair.

- Remove the bolts - arrows -.

- Remove the front coolant pipe from the engine and from the coolant pump.

Installing

Install in reverse order, paying attention to the following:

• Tightening specification, refer to => [ Coolant Pipes Overview ] Coolant Pipes Overview.

• Replace the O-rings.

- Clean and/or smooth the sealing surfaces of the O-rings.

- Coat the O-rings with coolant and install them.

- Install fan shroud. Refer to => [ Fan Shroud ] Service and Repair.

- Fill the coolant system => [ Filling ] Service and Repair.