Front Seats Service Position, Setting

Front Seats Service Position, Setting

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Service Position, Implementing

- Bring headrest into lowest lock position.

- Move seat as far back and up as possible.

• For the sake of clarity, the figure does not show the surrounding area.






Standard Seat (Manual):

- Pry the caps - 1 - from off the seat rail - 2 - using the trim removal wedge (3409).

Standard Seat (Power):

- Pry the caps - 1 - off the seat forward/back adjustment spindle using the trim removal wedge (3409).

Procedure for All Seat Versions:






- Unclip rear cover - 1 - with the trim removal wedge (3409) and pull the cover in the direction of the - arrow - off of connector station - 2 -.

• Do not disconnect electrical wires.

Service Position, Resetting

Install in reverse order of removal. Note the following:

- Make sure the cover tab slides into connector station correctly.

- Engage the cover correctly with the connector station.