Connector Station on Right Central Tube

Connector Station on Right Central Tube

Removing





- Remove the glove compartment.

- Disconnect electrical connectors - 2, 3, 4 and 5 - on the connector station.

- Remove the bolts - arrows - and connector station - 1 -.

- Unclip the corresponding connector base.

• For the exact assignment of the coupling station on the right central tube, refer to the current wiring diagram.

Installing

• Tightening specification, refer to => [ Front Relay Carrier and Fuse Panel Assembly Overview ] Front Relay Carrier and Fuse Panel Assembly Overview.

Install in reverse order of removal, observing the following:

- Install the glove compartment.