Oil Pressure Sender: Service and Repair

Oil Pressure Switch

Removing

R8 Coupe:

- Remove the engine cover - arrows -. Do not jerk or pull to one side.





- Loosen the hose clamps - 2 - and - 3 - and remove the air guide hose.





- Move the air guide hose, with the crankcase housing ventilation hose - 1 - still connected, to the side.

R8 Spyder:

- Remove the air filter housing.





All Vehicles:

- Disconnect the connector - 1 -.





- Remove the oil pressure switch (F1) - 2 -.

Installing

• Tightening specifications, refer to => [ Upper Engine Oil Cooler, Oil Check Valves and Spray Nozzle Valve Assembly Overview ] Upper Engine Oil Cooler, Oil Check Valves and Spray Nozzle Valve Assembly Overview.

Installation is in reverse order of removal, note the following:

• Replace sealing ring.

• Secure all hose connections with hose clamps appropriate for the model.

- Install air filter housing.