Seat Height Adjustment Handle

Seat Height Adjustment Handle

• The seat height adjustment handle can be replaced with the seat installed.

• Removal and installation is the same on the driver and passenger seat.

Special tools, testers and auxiliary items required

• Making an assisting tool





- Bend 3.5 mm wide - 2 - screwdriver - 1 - to dimensions:

• A = 20 mm

• B = maximum of 15 mm.

Removal





- Pull the seat height adjustment handle - 1 - as far up as possible and hold it in that position.

- Carefully pull the seat height adjustment handle away from the seat slightly.

- Guide assisting tool - 2 - into mount - 4 -.

- Pull the assisting tool in the - direction of arrow B - while pressing the clip spring outward.

- Remove the seat height adjustment handle in the - direction of arrow A -.

Installation





Installation is reverse of removal, but note the following:

- Replace the clip on the seat height adjustment handle while noting the clip installation location.

- Ensure the springs - 2 - in the clip - 3 - are positioned on the outside of the lever - 1 -.

- Make sure the seat height adjustment handle engages correctly with the clips.