Backrest Cover

Backrest Cover

Special tools, testers and auxiliary items required

• Pry Lever (80 - 200)









1 Right Backrest Cover

2 Left Backrest Cover

3 Retaining Clip

4 Bolt

• 2.5 Nm

• Replace with locking compound

5 Outer Part of Belt Guide

6 Inner Part of Belt Guide

• With release lever

• The illustration shows the sedan version.

• To remove, remove backrest cover, refer to => [ Backrest Cover and Upholstery ] Bucket Seat Covers and Upholstery

7 Backrest Frame

Backrest Cover, Removing and Installing





- Affix backrest panel all around trim - 1 - using adhesive tape - 2 -.

- Using (80-200), pry off upper backrest cover at inner side, starting from backrest panel.

- Disengage clip at front corner of backrest panel extremely carefully.

Outer Part of Belt Guide, Removing and Installing





- Carefully guide (80-200) between backrest cover and outer part of belt guide.

- Carefully press to disengage outer part of belt guide from inner part.