Power Trunk / Liftgate Lock Actuator: Service and Repair

Rear Lid Central Locking System Motor

Removing





Proceed as follows:

- Remove the luggage compartment liner.

- Disconnect electrical harness connector - 2 -.

- Remove bolts - arrows -.

- Remove the retaining plate - 1 - with the front lid positioning motor.

- Remove the bolts - 1 - and - 2 -.





- Slide the rear lid central locking system motor (V53) - item 4 - in the - direction of the arrow - and disengage the retaining plate - 3 -.

• On vehicles with a welded retaining plate, only loosen bolts - 1 - and - 2 - and slide the rear lid central locking system motor (V53) out in the direction of the arrow.

Installing

• Tightening specifications => [ Front Lid Lock and Positioning Motor Assembly Overview ] Front Lid Lock and Positioning Motor Assembly Overview.

Installation is reverse of removal.