Radiator Assembly Overview

Radiator Assembly Overview






1 Bolt

• 8 Nm

2 Retaining Clip

• Check for secure seat

3 ATF Cooler

• For automatic transmission

4 Condenser

• For air conditioning system

5 Clip

• Check for secure seat

6 Washer

7 Rubber Buffer

8 Radiator

• Removal and installation, refer to => [ Radiator ] Radiator

• Change coolant after replacing

9 Grommet

10 Bolt

• 5.5 Nm

11 O-ring

• Replace

12 Retaining Clip

13 Engine Coolant Temperature (ECT) Sensor (on Radiator) (G83)

14 O-ring

• Replace

15 Coolant Hose

• Illustration does not correspond to version in vehicle

• Connect to the radiator

16 Coolant Hose

• Illustration does not correspond to version in vehicle

17 Coolant Hose

• Illustration does not correspond to version in vehicle

• Connect to the radiator

18 O-ring

• Replace

19 Bolt

• 8 Nm

20 Bolt

• 8 Nm

21 Retaining Clip

• Check for secure seat

22 Hydraulic Oil Cooler

• For power steering

Connect the Coolant Hose with the Connector Coupling





- Remove the old O-ring - 2 - in the coolant hose - 3 -.

- Coat new O-ring with coolant and install it in the coolant hose.

- Press the coolant hose onto the connection - 1 - until it engages audibly.

- Press the coolant hose on again and pull to make sure the connection is engaged correctly.