Engine Oil Cooler

Engine Oil Cooler

Special tools, testers and auxiliary items required

• Hose Clamps Up to 25 mm Dia. (3094)

• Used Oil Collecting and Extracting Device (V.A.G 1782)

• Drip Tray (VAS 6208)

Removing


Risk of scalding due to hot steam and hot coolant.

• The coolant system is under pressure when the engine is warm.

• Reduce pressure by covering coolant reservoir cap with a cloth and carefully opening.

- Open the coolant reservoir cap.

- Place the (VAS 6208) under engine.

- Disconnect the coolant hoses - 1 - and - 2 - with the (3094) and remove them from the oil cooler.






- Place the (V.A.G 1782) under the engine.

- Remove the bolts - arrows - and remove the engine oil cooler.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Upper and Lower Oil Pan, Oil Pump and Oil Cooler Overview ] Upper and Lower Oil Pan, Oil Pump and Oil Cooler Overview.

• Replace sealing rings and seals.

• Secure all hose connections with hose clamps appropriate for the model.

- Fill engine oil and check oil level.

- Fill with coolant => [ Filling ] Procedures.