Left Cylinder Head Cover

Left Cylinder Head Cover

Removing

- Remove ignition coils.


Risk of violating emissions legislation.

• Do not open the hose connection - arrow -.

- Remove the left cylinder head bolts in sequence - 12 to 1 - and lay the cylinder head aside with the crankcase ventilation hose - arrow - connected.






Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Left Cylinder Head Cover, Tightening
Specifications and Sequence ] Cylinder Head Overview.

• Replace the cylinder head seal if it is damaged.

• Replace the cylinder head cover bolts when replacing the damaged seal.

- Clean the sealing surfaces; they must be free of oil and grease.

- Tighten the left cylinder head cover bolts. Refer to => [ Left Cylinder Head Cover, Tightening
Specifications and Sequence ] Cylinder Head Overview.

- Install ignition coils.