Left Flange Shaft Seal

Left Flange Shaft Seal

Special tools, testers and auxiliary items required

• Thrust Piece (3305)

• Pulling Hook (T20143/2)

• Sealing grease (G 052 128 A1)

Procedure

• Transmission installed.

- Remove left drive flange. Refer to => [ Left Flange Shaft ] Left Flange Shaft.

- Pull out flange shaft seal using (T20143/2).





- Lightly oil outer circumference of new shaft seal.





- Drive in new shaft seal as far as stop without tilting it.

- Fill area between sealing lip and dust lip - arrow - halfway with sealing grease (G 052 128 A1).





- Install left flange shaft. Refer to => [ Left Flange Shaft ] Left Flange Shaft.

- Check the transmission oil level in the manual transmission and fill. Refer to => [ Manual Transmission, Checking Gear Oil Level ] Manual Transmission, Checking Gear Oil Level.