Left Flange Shaft

Left Flange Shaft

Special tools, testers and auxiliary items required

• Oil Collecting and Extracting Device (V.A.G 1782)

Removing

- Remove left drive axle.

- Place (V.A.G 1782) under transmission.

- Remove the left flange shaft bolt by installing 2 bolts in the flange and counter holding the flange shaft with the assembly lever.





- Pull out flange shaft with spring.

Installing

• Tightening specification, refer to => [ Flange Shaft and Seals on Transmission Assembly Overview ] Flange Shaft and Seals on Transmission Assembly Overview.

Install in reverse order, paying attention to the following:

- Press flange shaft against spring force and tighten.

- Install left drive axle.

- Check the transmission oil level in the manual transmission and fill. Refer to => [ Manual Transmission, Checking Gear Oil Level ] Manual Transmission, Checking Gear Oil Level.