Harmonic Balancer - Crankshaft Pulley: Service and Repair

Vibration Damper

Special tools, testers and auxiliary items required

• Locking Pin (T10060 A)

• Counter-Holder Tool (T10069)

Removing

Risk of destroying due to reversed running direction on a used ribbed belt.

• Before removing ribbed belt, marking running direction with chalk or felt-tip pen for reinstallation later.

- To release ribbed belt tension, rotate tensioner in direction of - arrow -.





- Secure tensioner with (T10060 A).

- Remove noise insulation in center by loosening mounting parts - 1 through 4 -.





- Remove left and right noise insulation - arrows -.





- Remove ribbed belt from vibration damper ribbed belt pulley.

- Remove vibration damper bolt using (T10069).





Installing

• Tightening specifications, refer to => [ Ribbed Belt Drive Component Overview ] Ribbed Belt Drive Component Overview.

Installation is in reverse order of removal, note the following:

- Install ribbed belt. Refer to => [ Ribbed Belt ] Ribbed Belt.