Diagram 68/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Battery Interrupt Igniter, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

J234 - Airbag Control Module Overview Of Control Modules

J329 - Power Supply Relay (terminal 15) Overview Of Relay

J367 - Battery Monitoring Control Module 4.2L Gasoline, BAR Overview

J518 - Access/Start Control Module Access/Start Authorization System Component Overview

N253 - Battery Interrupt Igniter Overview Of Fuses

SD1 - Fuse 1 (on fuse panel D) Overview Of Fuses

SD2 - Fuse 2 (on fuse panel D) Overview Of Fuses

SD3 - Fuse 3 (on fuse panel D) Overview Of Fuses

SD4 - Fuse 4 (on fuse panel D) Overview Of Fuses

SD5 - Fuse 5 (on fuse panel D) Overview Of Fuses

T2au - Double Connector, yellow, on battery interrupt igniter

T2az - Double Connector, on battery monitoring control module

T10d - 10-Pin Connector, blue, connector station electronics box plenum chamber

T20e - 20-Pin Connector, black, on access/start control module

T75 - 75-Pin Connector, grey, on airbag control module (USA white)

(624) - Ground Connection (near starter battery)

(B273) - Plus Connection (15) (in main wiring harness)

* - Relay and fuse carrier below driver's seat

Next Diagram 68/3 (Tracks 15-28)